As the holiday season approaches, having a reliable resin for your Anycubic Photon becomes especially clear. I’ve tested different formulations, and the ANYCUBIC 3D Printer Resin 405nm SLA UV-Curing Grey 1000g stood out for its consistency. It offers improved adhesion, accuracy down to ±0.1mm, and boasts a flowability that speeds up printing without sacrificing detail.
This resin’s upgraded formula also produces less odor during printing and lasts longer, which makes it a smart choice for continuous projects. I found it perfect for intricate miniatures and detailed models, especially when you need high precision without the hassle of failed prints. After thorough testing, I can confidently recommend this resin for anyone who values stability, fine detail, and ease of use—especially if you want the best balance of quality and affordability for your Photon.
Top Recommendation: ANYCUBIC 3D Printer Resin 405nm SLA UV-Curing Grey 1000g
Why We Recommend It: This resin’s higher stability, reduced shrinkage, and precise ±0.1mm molding accuracy outperform competitors. Its improved flowability shortens printing time, while the balanced toughness prevents damage. Its longer shelf life and lower odor make it a versatile, user-friendly choice for high-quality results.
Best resin for 3d printer anycubic photon: Our Top 5 Picks
- ANYCUBIC 3D Printer Resin 405nm SLA UV-Curing Grey 1000g – Best UV Resin for Resin Printers
- ANYCUBIC Water Washable 3D Resin 2.0 1000g Grey – Best for Easy Post-Processing
- ANYCUBIC Standard 3D Printer Resin Plus 1000g Gray – Best Overall for Standard Prints
- ANYCUBIC ABS-Like Resin Pro 2, 1kg, Grey – Best Value
- ANYCUBIC ABS-Like Resin Pro 2 8K 3D Printer Resin 1kg – Best for High-Resolution, Detailed Prints
ANYCUBIC 3D Printer Resin 405nm SLA UV-Curing Grey 1000g
- ✓ High accuracy and detail
- ✓ Low odor and easy cleaning
- ✓ Long shelf life
- ✕ Slightly pricier
- ✕ Needs shaking before use
| Resin Type | 405nm SLA UV-Curing Grey Resin |
| Package Size | 1000 grams (1kg) |
| Molding Accuracy | ±0.1mm |
| Viscosity | 200 cps at 25°C |
| Color | Grey |
| Shelf Life | 18 months |
Right out of the box, I was impressed by how smooth and creamy the resin looked. It has a slightly lighter hue of grey than typical resins, which gave me a good feeling about its clarity and flow.
When I shook the bottle, the resin moved easily—no clumping or separation, which is always a plus.
During my first print, I noticed how consistent the layering was, thanks to the upgraded flowability. The resin’s viscosity at 200 cps made it flow into fine details without any fuss.
It also cured quickly under my UV light, and I appreciated how minimal the smell was compared to other resins I’ve used.
What really stood out was the accuracy—my detailed miniatures came out sharp, with a precision that really boosted my confidence. The improved stability meant fewer failures, and the balance between toughness and resilience kept my prints from being overly fragile or too stiff.
Cleaning was straightforward, and the resin didn’t leave much residue. Plus, the extended shelf life of 18 months means I can stock up without worrying about it going bad.
The compatibility with multiple LCD and DLP printers is a big bonus, fitting seamlessly into my setup.
Of course, it’s not perfect. The price is slightly higher than some basic resins, but I think the quality justifies it.
Overall, this resin offers a solid upgrade in detail, durability, and ease of use for anyone serious about resin printing.
ANYCUBIC Water Washable 3D Printer Resin 2.0 1000g Grey
- ✓ Easy water cleaning
- ✓ Vibrant, long-lasting color
- ✓ High detail resolution
- ✕ Slightly longer curing time
- ✕ Limited color options
| Resin Type | Water washable resin with hydrophilic groups |
| Color | Grey |
| Viscosity | Low viscosity (specific value not provided, inferred for high flow and adhesion) |
| Curing Wavelength Range | 365-405nm |
| Precision | Up to 0.15mm layer resolution |
| Elongation at Break | 16.62% |
The moment I opened the bottle of the ANYCUBIC Water Washable 3D Printer Resin 2.0, I was surprised by how smooth and runny it felt in my hand. It poured easily into my resin vat without any clumping or thick spots, which is a relief when you’re trying to avoid messes.
When I started printing my miniatures, the resin’s low odor made the whole process much more comfortable—no overwhelming fumes, just a faint, clean scent.
One thing I immediately appreciated was how simple it was to clean my prints. Instead of dealing with alcohol baths, I rinsed them in water, and they came out crisp and clear.
The upgraded formula really does stay vibrant over time, which is perfect for those detailed figures I love to create. I also noticed the high precision—my tiny details, like facial features and intricate armor, came out sharp with minimal post-processing.
The flexibility of the cured models impressed me. I gently bent a test piece, and it didn’t crack or break, thanks to the high resilience and elastic properties.
Plus, the resin adhered firmly to the build platform, reducing failed prints and wasted time. The water-soluble aspect is a game-changer, especially for indoor setups—less cleanup hassle and fewer fumes.
Overall, it offers a smooth, reliable printing experience with vibrant, durable results.
ANYCUBIC Standard 3D Printer Resin Plus 1000g Gray
- ✓ Higher print accuracy
- ✓ Improved adhesion and durability
- ✓ Lighter odor and easier cleaning
- ✕ Needs thorough shaking before use
- ✕ Slightly more expensive
| Resin Type | UV-curable standard resin for LCD/DLP 3D printers |
| Color | Gray |
| Package Weight | 1000 grams |
| Viscosity | 200 cps at 25°C |
| Molding Accuracy | ±0.1mm |
| Flexural Modulus | 1599.33 MPa |
The moment I shook the ANYCUBIC Standard Resin Plus and saw how smoothly the liquid flowed, I knew this was a game-changer for my printing projects. Its increased flowability at 200 cps/25℃ means less time waiting for resin to settle and fewer print failures.
During printing, I noticed the resin adheres more reliably to the build plate, thanks to the upgraded formula’s improved adhesion. The details on my latest miniatures came out sharper, with a molding accuracy now at ±0.1mm—significantly better than previous versions.
The resin’s toughness feels well-balanced; my prints don’t just look good but feel sturdy. Even after multiple layers, they resist minor impacts without cracking.
Plus, the smell is noticeably lighter, making the whole process more comfortable and less intrusive.
Cleaning is easier, too. The reduced odor and better flow mean less hassle during post-processing.
And with its high compatibility across LCD and DLP printers, I didn’t have to worry about whether it would work with my setup.
Overall, this resin feels like a step up—more precise, more durable, and more user-friendly. It’s especially great if you want detailed miniatures or prototypes without the usual mess and strong chemical smell.
The only thing to keep in mind is to shake it thoroughly to ensure even coloring, but that’s a small price for the quality you get.
ANYCUBIC ABS-Like Resin Pro 2, 1kg, Low Odor, Grey
- ✓ Very tough and durable
- ✓ Fast curing, high success rate
- ✓ Low odor, pleasant printing
- ✕ Slightly more expensive
- ✕ Requires careful handling
| Resin Type | ABS-Like resin with high toughness and elongation at break (35-40%) |
| Viscosity | Low viscosity for high flowability and fast curing |
| Shrinkage Rate | Lower than standard ABS-like resins, specific percentage not provided |
| Tensile Strength | Enhanced compared to previous version, specific value not provided |
| Elongation at Break | 35-40% |
| Odor Level | Low odor formulation for a more pleasant printing environment |
There’s a common myth that resin prints are always fragile and brittle, especially when it comes to tough applications. After working with the ANYCUBIC ABS-Like Resin Pro 2, I can confidently say that’s not the case.
This resin genuinely lives up to its promise of combining strength and toughness. I printed a few small structural parts, and they showed impressive durability.
The material feels thicker and more resilient compared to standard resins, which makes it ideal for functional prototypes or fixtures.
What really caught my eye is the high elongation at break—up to 40%, which is a huge leap from typical resins. It means the prints don’t just snap under pressure; they bend a little, giving you a safety margin.
Plus, the low viscosity makes the printing process smoother and faster, with less risk of failures due to delamination or poor adhesion.
The detail quality is excellent, with sharp edges and minimal shrinkage. The low odor formula also made my workspace much more comfortable, especially during longer prints.
I noticed the curing time was shorter compared to other resins, which helps when you’re in a hurry or trying to batch print.
Overall, this resin is a game-changer for anyone needing high-strength, detailed prints without the usual hassle. It’s a solid option for industrial prototypes or parts that need to withstand real-world stress.
ANYCUBIC ABS-Like Resin Pro 2 8K, 1kg, Grey
- ✓ Stronger and tougher prints
- ✓ Fast curing, high flowability
- ✓ Low odor, comfortable use
- ✕ Slightly higher cost
- ✕ Requires careful handling
| Shrinkage Rate | Lower than previous ABS-like resins, enabling high precision and minimal distortion |
| Viscosity | Low viscosity for high flowability and shorter curing times |
| Wavelength Compatibility | 365-405nm suitable for LCD and DLP 3D printers |
| Tensile Strength | Enhanced toughness with over 100% increase in elongation at break compared to previous versions |
| Color | Grey |
| Package Size | 1kg |
As soon as I popped open the box of the ANYCUBIC ABS-Like Resin Pro 2 8K, I was immediately struck by its smooth, light grey hue and the slightly viscous texture in my hands. It feels premium, almost silky, with a subtle chemical scent that’s surprisingly subdued for a resin of this strength.
Pouring it into my resin vat, I appreciated how effortlessly it flows, thanks to its high flowability.
During my first print, I noticed how quickly the resin cured, with minimal fuss or bubbles. The low viscosity really does speed up the process, making prints come out sharper and more detailed than with some other resins.
The fact that it adheres well to the build plate reduced failed prints, which is a huge relief after battling with other formulations.
What stood out most is its toughness. I printed some small structural parts, and they felt noticeably more durable—no brittleness or easy cracking.
The high elongation at break gave me confidence that these models could withstand a bit of stress without snapping. Plus, the low-odor formula made the entire process much more comfortable, especially in my small workspace.
Another plus: the resin’s compatibility with a range of LCD and DLP printers means I didn’t have to worry about whether it would work with my setup. The packaging was secure, leak-proof, and easy to handle.
Overall, it’s a reliable choice for those who need high precision, strength, and a smoother printing experience without the harsh smell.
What Features Make Resin Ideal for Anycubic Photon 3D Printing?
The features that make resin ideal for Anycubic Photon 3D printing include excellent detail resolution, fast curing times, low shrinkage, and a variety of formulations for specific applications.
- Excellent Detail Resolution
- Fast Curing Times
- Low Shrinkage
- Variety of Formulations
- Bright Colors and Transparency
- Biocompatibility (for specific resins)
- Odor Control Options
Resin for Anycubic Photon 3D printing delivers various beneficial features that enhance the printing experience.
-
Excellent Detail Resolution:
The feature of excellent detail resolution refers to the ability of resin to produce intricate and precise prints. High-resolution prints often result from the fine layer height and the light sensitivity of the resin. Many users report a significant difference in print quality compared to other materials. For instance, a study conducted by Choi et al. (2021) found that surface roughness improved with high-resolution resin, producing models with sharp details. -
Fast Curing Times:
Fast curing times indicate how quickly the resin solidifies after exposure to UV light. Typical exposure times for Anycubic Photon resins can range from 1 to 10 seconds per layer, which greatly reduces production time. This advantage is evident in applications requiring prompt prototyping or model production. According to research by Verdu et al. (2020), faster curing resulted in enhanced efficiency for production tasks. -
Low Shrinkage:
Low shrinkage means that the resin has minimal size distortion during the curing process. This stability helps maintain the dimensions of the printed objects. Resin with low shrinkage is especially important for precision parts, where tolerances are critical. Studies have shown that resins with low shrinkage can improve the fit of mechanical assemblies (Kumar et al., 2019). -
Variety of Formulations:
The variety of formulations available allows users to choose resin based on specific use cases. Options may include flexible, tough, or castable resins, catering to different applications. For example, specialized dental and jewelry resins offer tailored properties for those industries. This versatility raises the utility of the Anycubic Photon printer across different sectors. -
Bright Colors and Transparency:
Bright colors and transparency in resin enhance aesthetic appeal. Users can select from a spectrum of colors, allowing for vibrant and visually striking models. Transparent resins are useful for prototypes that require visual inspection of internal structures. User feedback underscores the attractive finish achieved with these resins. -
Biocompatibility (for specific resins):
Biocompatibility denotes that certain resins are safe for medical applications, such as dental and prosthetic prints. This is crucial for users in healthcare who require materials that do not cause adverse reactions. The FDA has approved select resins specifically for medical use, which enhances their trustworthiness in applications where safety is paramount. -
Odor Control Options:
Odor control options in resin technology aim to reduce the unpleasant smell associated with resin printing. This is particularly beneficial for users operating in confined spaces. Manufacturers now offer low-odor formulations that maintain performance while improving user experience. Surveys among users indicate a preference for resins with minimized odors during curing.
How Do Curing Times Influence 3D Printing Satisfaction?
Curing times significantly influence 3D printing satisfaction by affecting print quality, detail accuracy, and overall project completion time. Several key points elaborate on this impact:
-
Print Quality: Proper curing times enhance the bond between resin layers. If the curing time is too short, layers may remain uncured. This leads to weak structures and visible imperfections. A study by Huang et al. (2020) found that adequate curing time improved the mechanical strength of printed models by up to 25%.
-
Detail Accuracy: Curing times impact the precision of fine details in prints. Short curing durations may allow for dimensional inaccuracies and distortions, mainly in intricate designs. Research by Zhang et al. (2021) indicated that optimal curing times resulted in a 15% increase in the fidelity of printed details.
-
Project Completion Time: Longer curing times can extend the overall time needed to finish a project. However, insufficient curing leads to failures that require reprinting, effectively increasing project duration. A balance is crucial for maintaining efficiency without sacrificing quality, as demonstrated in studies focused on workflow optimization in 3D printing.
-
Surface Finish: Curing times also affect surface smoothness. Insufficient curing can leave a tacky surface, while optimal curing leads to a shiny finish. This parameter is essential for aesthetic prints that require a professional-quality look.
-
Post-Processing: Reduced curing times can simplify post-processing tasks such as sanding and painting. Well-cured prints allow for easier handling and finishing. A consumer feedback survey indicated that 70% of users preferred prints with consistent curing times for smoother post-processing efforts.
By addressing these aspects of curing times, users can improve their overall satisfaction with 3D printing outcomes.
Which Properties Determine the Quality of Resin for Anycubic Photon?
The quality of resin for the Anycubic Photon depends on several key properties.
- Viscosity
- Cure time
- Flexibility
- Shrinkage rate
- Color accuracy
- Odor
- Environmental impact
- User reviews and community feedback
These factors play an important role in the overall performance and suitability of resin for different printing applications. Understanding them can help users make informed choices.
-
Viscosity: Viscosity refers to the thickness and flow characteristics of resin. Low viscosity resins flow more easily, improving detail and reducing printing defects. High viscosity resins may lead to challenges in printing detailed objects but can be more suited for structural applications. Data from studies indicates that optimal viscosity ranges improve both layer adhesion and print quality.
-
Cure Time: Cure time is the duration required for the resin to harden after exposure to UV light. Shorter cure times can increase printing speed, while longer cure times may improve the final surface finish. A 2021 study by Zhao et al. found that adjusting the cure time can significantly impact the mechanical properties of the finished print.
-
Flexibility: Flexibility determines how well the printed object can bend or flex without breaking. Resins with higher flexibility are better for applications requiring durable, shock-resistant parts, while rigid resins are ideal for items needing precision. According to material testing from 2022, flexible resins showed up to 50% higher impact resistance than standard rigid versions.
-
Shrinkage Rate: Shrinkage rate describes how much a resin contracts when cured. Resins with low shrinkage rates yield more accurate dimensions. High shrinkage can lead to warping and reduced detail. Research conducted by Xiong et al., 2020 found that resins with a shrinkage rate below 1% provided superior dimensional accuracy.
-
Color Accuracy: Color accuracy addresses how well a resin achieves the desired hue in the final print. This feature is particularly important for artistic applications. Reviews show that brands often vary widely in their color fidelity, with some users prioritizing formulations known for their vibrant results.
-
Odor: The odor emitted by resin during printing can affect user experience and safety. Low-odor resins are preferable in home settings. Safety guidelines advocate for using these formulations, as strong odors can indicate the presence of harmful chemicals. User feedback highlights that low-odor options significantly improve the overall printing environment.
-
Environmental Impact: Environmental impact considers the sustainability of resin materials and their biodegradability. Eco-friendly resins are becoming popular due to growing awareness of waste. Recent studies emphasize the importance of using resins that minimize toxic waste and promote recycling.
-
User Reviews and Community Feedback: User experiences and reviews can provide insights into the practical performance of different resins. Online communities frequently provide useful comparisons and recommendations based on real-world application. The feedback helps new users choose reliable products.
Understanding these properties enables users to select the best resin options tailored to their specific 3D printing needs with the Anycubic Photon.
What Are the Best Brands of Resin for Anycubic Photon Users?
The best brands of resin for Anycubic Photon users include Elegoo, Anycubic, and Monocure.
- Elegoo Water Washable Resin
- Anycubic Plant-Based Resin
- Monocure Rapid Resin
- Siraya Tech Fast Resin
- ResiPro Flexible Resin
These brands offer various attributes, such as ease of cleaning, environmental friendliness, quick curing times, and flexibility. Different users may prefer certain resins for specific applications like detailed models or durability.
-
Elegoo Water Washable Resin: Elegoo Water Washable Resin offers convenience for cleanup. This resin dissolves easily in water, eliminating the need for hazardous chemicals. Users often praise its low odor and vibrant coloration, making it ideal for detailed prints. It cures well under UV light, providing strong and accurate results. A common review highlights its effectiveness in producing complex designs without the hassle of traditional resin cleanup.
-
Anycubic Plant-Based Resin: Anycubic Plant-Based Resin is noted for its environmentally friendly formulation. This resin uses plant-derived materials and emits fewer harmful substances during printing. Users appreciate its smooth finish and high detail resolution. According to a study by XYZPrinting in 2022, designs printed with plant-based resins exhibited less brittleness, making them suitable for functional prototypes.
-
Monocure Rapid Resin: Monocure Rapid Resin is designed for fast printing with a quick curing time. This resin suits users needing prompt turnaround for 3D prints. Its lower viscosity promotes smoother flow and detail retention. Feedback from users frequently mentions shorter print times, enhancing productivity for businesses. Monocure claims that its resin can reduce print times by up to 50% compared to standard resins.
-
Siraya Tech Fast Resin: Siraya Tech Fast Resin combines speed and quality, featuring a fast curing time while maintaining high detail. This resin is favored by users for both prototyping and artistic applications. It shows less shrinkage during cooling, resulting in more accurate dimensions. Reviews often highlight its versatility for various projects, from models to functional parts.
-
ResiPro Flexible Resin: ResiPro Flexible Resin provides a durable and elastic solution for models requiring flexibility. Users find it suitable for parts needing resilience under pressure. The resin can withstand repeated bending and is often used for creating wearable items or parts requiring movement. Feedback highlights its effectiveness for custom fit applications and prototypes requiring some give.
What Advantages Can You Expect from High-Quality Resins with the Anycubic Photon?
High-quality resins offer several advantages when used with the Anycubic Photon 3D printer. These benefits include improved print quality, enhanced durability, and greater resolution capabilities.
- Improved Print Quality
- Enhanced Durability
- Greater Resolution Capabilities
- Fast Curing Times
- Reduced Shrinkage
- Increased Color Variety
The transition to examining these advantages is essential for understanding their specific implications in 3D printing with the Anycubic Photon.
-
Improved Print Quality: High-quality resins yield superior print quality compared to lower-grade options. This enhanced print quality results in finer details and smoother surfaces. According to a study by Anycubic in 2021, printers utilizing high-quality resins demonstrated up to a 30% improvement in detail accuracy, making them ideal for intricate designs.
-
Enhanced Durability: High-quality resins provide better strength and impact resistance. This durability is essential for functional prints that experience wear and tear. For example, users of the Anycubic Photon have reported that models made with durable resins showed significant resilience against breaking or chipping, as noted in user reviews on community forums.
-
Greater Resolution Capabilities: High-quality resins often allow for finer layer heights, enabling higher resolution prints. The Anycubic Photon can produce prints with layer resolutions as fine as 10 microns, and high-quality resins can take full advantage of this capability, resulting in stunningly detailed models.
-
Fast Curing Times: High-quality resins can often cure more quickly under UV light. This rapid curing time can enhance productivity for users who require fast turnaround times. Professionals in the industry have noted that resins curing in as little as 1 to 2 seconds can significantly reduce print times.
-
Reduced Shrinkage: High-quality resins typically exhibit lower shrinkage during the curing process. This characteristic leads to better dimensional accuracy in the final prints, which is especially valuable in applications requiring precise measurements, such as jewelry design or engineering prototypes.
-
Increased Color Variety: High-quality resins are available in a broader spectrum of colors and finishes. This variety allows users to create more visually appealing prints without the need for post-processing painting. Creative designers using the Anycubic Photon benefit from the range of options that can complement their artistic expressions.
These advantages collectively enhance the overall performance and outcome of 3D printing projects when using the Anycubic Photon with high-quality resins.
What Safety Measures Should Be Followed When Using Resin in the Anycubic Photon?
When using resin in the Anycubic Photon, it is essential to follow specific safety measures to prevent health risks and accidents.
- Wear personal protective equipment (PPE), including gloves and goggles.
- Use resin in a well-ventilated area.
- Avoid skin contact with resin and keep it away from children and pets.
- Store resin in a cool, dark place, away from light sources.
- Clean spills immediately with appropriate materials.
- Follow disposal guidelines for resin waste.
- Use a mask to avoid inhaling fumes.
Transitioning from the list of safety measures, it is crucial to delve into the details of each point to understand their significance clearly.
-
Wearing Personal Protective Equipment (PPE): Wearing PPE is vital when handling resin. Gloves protect the skin from irritation and allergic reactions, while goggles shield the eyes from potential splashes. A study by the American Journal of Industrial Medicine (2019) suggests that exposure to liquid resin can cause dermatitis and other skin conditions.
-
Using Resin in a Well-Ventilated Area: Using resin in a well-ventilated space helps minimize exposure to harmful fumes. Resin printing can release volatile organic compounds (VOCs), which may lead to respiratory issues. The OSHA recommends adequate ventilation, such as a fume hood or open windows, to ensure safety.
-
Avoiding Skin Contact with Resin: Direct contact with liquid resin can be harmful. Resin contains various chemicals that can lead to skin irritation or allergic reactions. Keeping resin out of reach of children and pets further ensures their safety, as accidental exposure can have severe health implications.
-
Storing Resin in a Cool, Dark Place: Storing resin in a cool, dark location reduces the risk of degradation. Exposure to light and heat can cause resin to cure prematurely, resulting in unusable materials. According to the Material Safety Data Sheet (MSDS) from several resin manufacturers, dark storage extends resin shelf life.
-
Cleaning Spills Immediately: Addressing spills promptly helps prevent accidents and exposure. Using materials such as paper towels or absorbent pads to clean resin spills is recommended. Additionally, a study published in the Journal of Hazardous Materials highlights that immediate clean-up reduces the risk of slips and skin contact.
-
Following Disposal Guidelines for Resin Waste: Disposing of resin waste properly is crucial for environmental safety. Many local regulations require specific guidelines for resin disposal, such as curing the leftover resin before disposal. The Environmental Protection Agency (EPA) emphasizes that improperly discarded resin can contaminate soil and waterways.
-
Using a Mask to Avoid Inhaling Fumes: Wearing a mask when handling resin can protect against inhaling harmful fumes. While many users may overlook this, respirators or masks specifically designed for chemical safety are advisable. Research indicates that prolonged exposure to resin fumes may lead to dizziness and long-term health issues.
How Do Different Resin Types Affect Printing Results with the Anycubic Photon?
Different resin types affect printing results with the Anycubic Photon by influencing factors such as detail accuracy, surface finish, strength, and print speed. Each resin type has unique properties that significantly alter these aspects.
-
Detail accuracy: Standard resins provide good accuracy, while high-detail resins enhance fine details. A study conducted by Zavaleta et al. (2020) found that using a high-detail resin can improve features by up to 20% compared to standard formulations.
-
Surface finish: Smoothness varies among resins. For example, a gray resin tends to produce finer surfaces, as shown by Engels et al. (2021), who reported a 15% reduction in visible layer lines in gray resin prints compared to clear resins.
-
Strength: The mechanical properties change with different resin types. Tough resins exhibit higher impact resistance, making prints more durable. According to research by Feldman and Lin (2019), tough resins can withstand forces up to 30% higher than standard resins without breaking.
-
Print speed: Some resins cure faster than others. Fast-curing resins can reduce print times by as much as 25%. A performance comparison by Kim et al. (2023) indicated that choosing a fast-curing resin allowed for more efficient print cycles in the Photon.
By understanding these effects, users can select the appropriate resin type to achieve their desired print quality.
Related Post: